JeeLink2MQTT/src/jeelink2mqtt.py

#!/usr/bin/python -u
# -*- coding: utf-8 -*-
#
import serial
import time
import os
import paho.mqtt.client as mqtt
#import json
#import math
#import numpy as np
#import httplib

verbosemode = False

def touch(fname, times=None):
    with open(fname, 'a'):
        os.utime(fname, times)

def on_connect(client, userdata, flags, rc):
    print("MQTT connected with result code " + str(rc))
    #client.subscribe("wetter/atemp")

def on_disconnect(client, userdata, rc):
    if rc != 0:
        print "Unexpected MQTT disconnection. Will auto-reconnect"
        
#def on_message(client, userdata, msg):
#    #print(msg.topic + " " + str(msg.payload))
#    global atemp
#    atemp = msg.payload
    

minUpdateInterval = 60
mqtt_topic_prefix = "LaCrosse"
override_updateinterval_on_change = False
atemp_sensor_idx = 94

sensors = {}
sensors_idx = {}
with open("/home/pi/jeelink_sensors.csv", "r") as sensorscsv:
    for line in sensorscsv:
        if line.find('ID,DomoticzIdx,Name') == -1:
            # nur Zeilen die nicht der header sind sind interessant
            line = line.strip('\r')
            line = line.strip('\n')
            
            parts = line.split(',')
            sensorId = parts[0]
            domoticzIdx = parts[1]
            sensorName = parts[2]
            
            sensors[str(sensorId)] = str(sensorName)
            sensors_idx[str(sensorId)] = str(domoticzIdx)

            
mqttc = mqtt.Client()
mqttc.on_connect = on_connect
mqttc.on_disconnect = on_disconnect
##mqttc.on_message = on_message

mqttc.connect("10.1.1.11", 1883, 60)

mqttc.loop_start()
#mqttc.loop_forever()

ser = serial.Serial(port='/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL01MYTF-if00-port0',
    baudrate = 57600,
    parity=serial.PARITY_NONE,
    stopbits=serial.STOPBITS_ONE,
    bytesize=serial.EIGHTBITS,
    timeout=1)

#sensors = {'4':'Arbeitszimmer','16':'AussenGarten','60':'AussenParkplatz','50':'Bad','39':'Balkon','55':'Kueche','40':'Schlafzimmer'}
#sensors_idx = {'4':'1','16':'94','60':'113','50':'4','39':'88','55':'6','40':'3'}

if verbosemode:
    print sensors
    print sensors_idx

sensors_lastTemp = {}
sensors_lastHum = {}
sensors_lastUpdate = {}
    
try:
    while True:
        msg_was_sent = 0
        
        #clear serial buffer to remove junk and noise
        ser.flushInput()
        
        #read buffer until cr/lf
        serLine = ser.readline()

        if(serLine):
            #print (repr(serLine))    #Echo the serial buffer bytes up to the CRLF back to screen
            serLine = serLine.strip('\r')
            serLine = serLine.strip('\n')
            
            if verbosemode:
                print serLine
            
            if serLine.find('OK 9') != -1:
                # uns interessieren nur reinkommende Zeilen die mit "OK 9 " beginnen
                
                # 0  1 2  3   4   5   6
                # OK 9 ID XXX XXX XXX XXX
                # |  | |  |   |   |   |
                # |  | |  |   |   |   --- Humidity incl. WeakBatteryFlag
                # |  | |  |   |   |------ Temp * 10 + 1000 LSB
                # |  | |  |   |---------- Temp * 10 + 1000 MSB
                # |  | |  |-------------- Sensor type (1 or 2) +128 if NewBatteryFlag
                # |  | |----------------- Sensor ID
                # |  |------------------- fix "9"
                # |---------------------- fix "OK"
                
                bytes = serLine.split(' ')
                
                #addr = bytes[2]
                #addr = "{0:x}".format(int(bytes[2]))
                #addr = hex((int(bytes[2])))
                addr = int(bytes[2])
                addrhex = "{0:x}".format(int(bytes[2]))
                
                currentsensor_name = sensors.get(str(addr), None)
                #if currentsensor_name == 0: 
                if currentsensor_name is None: 
                    fname = '/home/pi/logs/jeelink_unknown_sensor_' + str(addr)
                    try:
                        touch(fname)
                    except:
                        # guat dann hoit ned...
                        pass
                    if verbosemode:
                        print "unknown sensor ID " + str(addr)
                        temp = (int(bytes[4])*256 + int(bytes[5]) - 1000)/10.0
                        print "Temp: " + str(temp)
                
                lastUpdate = sensors_lastUpdate.get(str(addr), None)
                lastTemp = sensors_lastTemp.get(str(addr), None)
                lastHum = sensors_lastHum.get(str(addr), None)
                currentsensor_idx = sensors_idx.get(str(addr),None)
                
                senddata = False
                if currentsensor_idx is not None:
                    if override_updateinterval_on_change:
                        if lastTemp != str(temp) or lastHum != str(hum):
                            senddata = True
                            #print "hier! " + str(temp) + " != " + str(lastTemp) + "    " + str(hum) + " != " + str(lastHum)
                            
                    if lastUpdate is not None:
                        timediff = int(time.time()) - lastUpdate
                        if timediff >= minUpdateInterval:
                            senddata = True
                            #print "do!"
                    else:
                        senddata = True
                
                if senddata:
                    if int(bytes[3]) >= 128: 
                        batt_new = 1
                        type = int(bytes[3]) - 128
                    else:
                        batt_new = 0
                        type = int(bytes[3])
                    
                    temp = (int(bytes[4])*256 + int(bytes[5]) - 1000)/10.0
                    
                    if int(bytes[6]) >= 128: 
                        batt_low = 1
                        hum = int(bytes[6]) - 128
                    else:
                        batt_low = 0
                        hum = int(bytes[6])
                        if hum > 100: 
                            hum = 100
                    
                    if batt_low == 0:
                        batterystate = "ok"
                    else:
                        batterystate = "low"
                    
                    sensors_lastUpdate[str(addr)] = int(time.time())
                    sensors_lastTemp[str(addr)] = str(temp)
                    sensors_lastHum[str(addr)] = str(hum)
                    
                    if int(currentsensor_idx) == atemp_sensor_idx:
                        mqttc.publish("wetter/atemp", str(temp), qos=2, retain=True)
                        mqttc.publish("wetter/ahum", str(hum), qos=2, retain=True)
                    
                    domoticz_json = "{\"idx\":" + str(currentsensor_idx) + ",\"nvalue\":0,\"svalue\":\"" + str(temp) + ";" + str(hum) + ";1\"}"
                    if verbosemode:
                        print domoticz_json
                    mqttc.publish("domoticz/in", domoticz_json, qos=2, retain=False)
                    
                    mqttc.publish(mqtt_topic_prefix+"/"+str(currentsensor_name)+"/temperature", str(temp), qos=2, retain=True)
                    mqttc.publish(mqtt_topic_prefix+"/"+str(currentsensor_name)+"/humidity", str(hum), qos=2, retain=True)
                    mqttc.publish(mqtt_topic_prefix+"/"+str(currentsensor_name)+"/battery", str(batterystate), qos=2, retain=True)
                    
                    lacrosse_json = "{\"temperature\":" + str(temp) + ", \"humidity\":" + str(hum) + ", \"battery\":\"" + str(batterystate) + "\"}"
                    mqttc.publish(mqtt_topic_prefix+"/"+str(currentsensor_name)+"/json", lacrosse_json, qos=2, retain=True)
                    
                    if verbosemode:
                        print "addr: " + str(addr) + " = 0x" + str(addrhex) + "   batt_new: " + str(batt_new) + "   type: " + str(type) + "   batt_low: " + str(batt_low) + "   temp: " + str(temp) + "   hum: " + str(hum) + "   Name: " + str(currentsensor_name)
                
                    try:
                        touch("/tmp/jeelink2mqtt_running")
                    except:
                        # guat dann ned...
                        pass

except KeyboardInterrupt, e:
    print('\n')