Updated README and setup.py

README.md

@@ -7,8 +7,7 @@ Its been verified to work with a Raspberry Pi with a Linksprite RS485 shield and
 #### Hardware
 
 * Raspberry Pi 3
-* RS485 Shield V3 for RPi:
-http://linksprite.com/wiki/index.php5?title=RS485/GPIO_Shield_for_Raspberry_Pi_V3.0
+* [Linksprite RS485 Shield V3 for RPi](http://linksprite.com/wiki/index.php5?title=RS485/GPIO_Shield_for_Raspberry_Pi_V3.0)
 * Modbus based Energy Meter, e.g WEBIQ 131D / Eastron SDM120 or WEBIQ 343L / Eastron SMD630
 
 #### Software
@@ -21,109 +20,101 @@ http://linksprite.com/wiki/index.php5?title=RS485/GPIO_Shield_for_Raspberry_Pi_V
 
 ### Prerequisite
 
-* Download Raspbian Stretch Lite and Flash on SD-card, e.g. by using Etcher
-https://www.raspberrypi.org/downloads/raspbian/
-* Mount the RS485 shield on the Raspberry Pi’s GPIO header.
-* Power up Rasberry Pi and setup password (passwd) and SSH, localization, network etc using sudo raspi-config
-* With raspi-config open, go to “5 Interfacing Options” -> “P6 Serial” and disable serial login shell and Enable serial port hardware (NO and then YES)
-* Add the following lines to /boot/config.txt'
-```sh
-# Disable built in Bluetooth
-dtoverlay=pi3-miniuart-bt
-```
-source: http://www.briandorey.com/post/Raspberry-Pi-3-UART-Boot-Overlay-Part-Two
-
-* To disable the serial console, you need to edit the /boot/cmdline.txt file to look like the following row
-```sh
-dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4  elevator=deadline fsck.repair=yes rootwait
-```
-source: http://www.briandorey.com/post/Raspberry-Pi-3-UART-Boot-Overlay-Part-Two
+* [Download Raspbian Stretch Lite](https://www.raspberrypi.org/downloads/raspbian/) and Flash on SD-card, e.g. by using Etcher
+* Mount the RS485 shield on the Raspberry Pi’s GPIO header and connect the RS485 cables.
+* Power up Rasberry Pi and setup password (passwd) and SSH, localization, network etc. using
+    ```sh
+    $ sudo raspi-config
+    ```
+* With raspi-config open, go to
+    `5 Interfacing Options` -> `P6 Serial` and `Disable serial login shell` and `Enable serial port hardware` (i.e. NO and then YES)
+* Add the following lines to `/boot/config.txt` [source](http://www.briandorey.com/post/Raspberry-Pi-3-UART-Boot-Overlay-Part-Two)
+    ```sh
+    # Disable built in Bluetooth
+    dtoverlay=pi3-miniuart-bt
+    ```
+* To disable the serial console, you need to edit the /boot/cmdline.txt file to look like the following row. [source](http://www.briandorey.com/post/Raspberry-Pi-3-UART-Boot-Overlay-Part-Two)
+    ```sh
+    dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4  elevator=deadline fsck.repair=yes rootwait
+    ```
 
 * Install Python Package Manager PIP if not already installed (not installed on Rasbian Lite):
-```sh
-$ sudo apt-get install python-pip
-```
+    ```sh
+    $ sudo apt-get install python-pip
+    ```
 
 ### Installation
 #### Install InfluxDB
-source: https://docs.influxdata.com/influxdb/v1.3/introduction/installation/
+[source](https://docs.influxdata.com/influxdb/v1.3/introduction/installation/)
 
 #### Step-by-step instructions
 * Add the InfluxData repository
-```sh
-$ curl -sL https://repos.influxdata.com/influxdb.key | sudo apt-key add -
-$ source /etc/os-release
-$ test $VERSION_ID = "9" && echo "deb https://repos.influxdata.com/debian stretch stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
-```
-
+    ```sh
+    $ curl -sL https://repos.influxdata.com/influxdb.key | sudo apt-key add -
+    $ source /etc/os-release
+    $ test $VERSION_ID = "9" && echo "deb https://repos.influxdata.com/debian stretch stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
+    ```
 * Download and install
-```sh
-$ sudo apt-get update && sudo apt-get install influxdb
-```
+    ```sh
+    $ sudo apt-get update && sudo apt-get install influxdb
+    ```
 * Start the influxdb service
-```sh
-$ sudo service influxdb start
-

$ sudo service influxdb restart
-```
+    ```sh
+    $ sudo service influxdb start
+

  $ sudo service influxdb restart
+    ```
 
 * Create the database
-```sh
-
$ sudo influx
-
CREATE DATABASE db_meters
-exit

-```
+    ```sh
+
   $ sudo influx
+
   CREATE DATABASE db_meters
+    exit

+    ```
 
 #### Install Grafana
-source: http://docs.grafana.org/installation/debian/
+[source](http://docs.grafana.org/installation/debian/)
 
 ##### Step-by-step instructions
 * Add APT Repository
-```sh
-$ echo "deb https://dl.bintray.com/fg2it/deb-rpi-1b jessie main" | sudo tee -a /etc/apt/sources.list.d/grafana.list
-```
-
+    ```sh
+    $ echo "deb https://dl.bintray.com/fg2it/deb-rpi-1b jessie main" | sudo tee -a /etc/apt/sources.list.d/grafana.list
+    ```
 * Add Bintray key
-```sh
-$ curl https://bintray.com/user/downloadSubjectPublicKey?username=bintray | sudo apt-key add -
-```
-
+    ```sh
+    $ curl https://bintray.com/user/downloadSubjectPublicKey?username=bintray | sudo apt-key add -
+    ```
 * Now install
-```sh
-$ sudo apt-get update
-
$ sudo apt-get install grafana

-```
-
+    ```sh
+    $ sudo apt-get update && sudo apt-get install grafana

+    ```
 * Start the service using systemd:
-```sh
-$ sudo systemctl daemon-reload
-$ systemctl start grafana-server
-$ systemctl status grafana-server
-```
-
+    ```sh
+    $ sudo systemctl daemon-reload
+    $ systemctl start grafana-server
+    $ systemctl status grafana-server
+    ```
 * Enable the systemd service so that Grafana starts at boot.
-```sh
-$ sudo systemctl enable grafana-server.service
-```
+    ```sh
+    $ sudo systemctl enable grafana-server.service
+    ```
 * Go to http://localhost:3000 and login using admin / admin (remember to change password)
 
 #### Install Energy Meter Logger:
 * Download and install from github
-```sh
-$ pip install git+https://github.com/samuelphy/energy-meter-logger
-```
+    ```sh
+    $ pip install git+https://github.com/samuelphy/energy-meter-logger
+    ```
 * Make script file executable
-```sh
-$ chmod 777 read_energy_meter.py
-```
-
+    ```sh
+    $ chmod 777 read_energy_meter.py
+    ```
 * Edit meters.yml to match your configuration
 * Test the configuration by running:
-```sh
-./read_energy_meter.py
-```
-* Run the python script at startup
-Add to following lines to the end of /etc/rc.local but before exit:
-```sh
-# Start Elphy Energy Meter Logger
-/home/pi/read_energy_meter.py --interval 60 > /var/log/meter.log &
-```
+    ```sh
+    ./read_energy_meter.py
+    ```
+* Run the python script at startup. Add to following lines to the end of /etc/rc.local but before exit:
+    ```sh
+    # Start Elphy Energy Meter Logger
+    /home/pi/read_energy_meter.py --interval 60 > /var/log/meter.log &
+    ```

setup.py

@@ -1,8 +1,6 @@
 import sys
 from setuptools import setup
 
-import ruuvitag_sensor
-
 try:
     import pypandoc
     readme = pypandoc.convert('README.md', 'rst')