Added link to Hackster project

README.md

@@ -1,6 +1,6 @@
 # Energy Meter Logger
 Log your Energy Meter data on a Raspberry Pi and plot graphs of your energy consumption.
-Its been verified to work with a Raspberry Pi with a Linksprite RS485 shield and reading values from a WEBIQ131D / SDM120. By changing the meters.yml file and making a corresponding [model].yml file it should be possible to use other models.
+Its been verified to work with a Raspberry Pi with a Linksprite RS485 shield and reading values from WEBIQ131D / SDM120 and WEBIQ343L / SDM630. By changing the meters.yml file and making a corresponding [model].yml file it should be possible to use other modbus enabled models.
 
 ### Requirements
 
@@ -20,35 +20,10 @@ Its been verified to work with a Raspberry Pi with a Linksprite RS485 shield and
 
 ### Prerequisite
 
-* [Download Raspbian Stretch Lite](https://www.raspberrypi.org/downloads/raspbian/) and Flash on SD-card, e.g. by using Etcher
-* Mount the RS485 shield on the Raspberry Pi’s GPIO header and connect the RS485 cables.
-* Power up Rasberry Pi and setup password (passwd) and SSH, localization, network etc. using
-    ```sh
-    $ sudo raspi-config
-    ```
-* With raspi-config open, go to
-    `5 Interfacing Options` -> `P6 Serial` and `Disable serial login shell` and `Enable serial port hardware` (i.e. NO and then YES)
-* To be able to use the UART you need to disable the built in Bluetooth since it shares the UART. To do so, add the following lines to `/boot/config.txt` [source](http://www.briandorey.com/post/Raspberry-Pi-3-UART-Boot-Overlay-Part-Two)
-    ```sh
-    # Disable built in Bluetooth
-    dtoverlay=pi3-miniuart-bt
-    ```
-* To disable the serial console, you need to edit the /boot/cmdline.txt file to look like the following row. [source](http://www.briandorey.com/post/Raspberry-Pi-3-UART-Boot-Overlay-Part-Two)
-    ```sh
-    dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
-    ```
-* Install Python Package Manager PIP if not already installed (not installed on Raspbian Lite):
-    ```sh
-    $ sudo apt-get install python-pip
-    ```
-* Install Git if not already installed (not installed on Raspbian Lite):
-    ```sh
-    $ sudo apt-get install git
-    ```    
+This project has been documented at [Hackster](https://www.hackster.io/samuelphy/energy-meter-logger-6a3468). Please follow the instructions there for more detailed information.
 
 ### Installation
-#### Install InfluxDB
-[source](https://docs.influxdata.com/influxdb/v1.3/introduction/installation/)
+#### Install InfluxDB*
 
 ##### Step-by-step instructions
 * Add the InfluxData repository
@@ -71,9 +46,9 @@ Its been verified to work with a Raspberry Pi with a Linksprite RS485 shield and
     CREATE DATABASE db_meters
     exit

     ```
+[*source](https://docs.influxdata.com/influxdb/v1.3/introduction/installation/)
 
-#### Install Grafana
-[source](http://docs.grafana.org/installation/debian/)
+#### Install Grafana*
 
 ##### Step-by-step instructions
 * Add APT Repository
@@ -99,6 +74,7 @@ Its been verified to work with a Raspberry Pi with a Linksprite RS485 shield and
     $ sudo systemctl enable grafana-server.service
     ```
 * Go to http://localhost:3000 and login using admin / admin (remember to change password)
+[*source](http://docs.grafana.org/installation/debian/)
 
 #### Install Energy Meter Logger:
 * Download and install from Github