Simple solution to connect some sensors to any linux host via USB as a replacement for previously used Raspberry Pi´s GPIOs.

FloKra 8d80ead381 30.05.2023 4 days ago
HomeServerIOExt_Arduino 1b6aaed35f initial checkin 2 months ago
ioext 8d80ead381 30.05.2023 4 days ago
CHANGELOG.txt 8d80ead381 30.05.2023 4 days ago 873ec76d6f update 2 months ago


When migrating my home control server from a Raspberry Pi to x86 hardware I needed an interface to connect some sensors (door contact, PIR sensors, temperature sensor) which were previously connected to the RPi´s GPIOs.

This simple solution consists of an Arduino Nano which is connected to the host via USB and a daemon written in Python which publishes the states over MQTT.

  • Arduino reads the sensors/IO-Pins and sends values/state changes via Serial
  • Python program runs as a daemon, receives the serial data and sends values/states to an MQTT broker


  • download/copy ioext directory to /home/pi/ioext
  • edit - change configuration for serial, MQTT etc (serial should be accessed via /dev/serial/by-id/...)
  • if python3 and/or pip is not installed - install it as root: apt install python3 python3-pip
  • install requirements: pip install -r requirements.txt
  • chmod +x /home/pi/ioext/
  • test it: ./

install systemd service (as root):

  • cp /home/pi/ioext/ioext.service /usr/lib/systemd/system
  • systemctl daemon-reload
  • systemctl enable ioext
  • systemctl start ioext