| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586 |
- [main]
- publish_on_mqtt = True
- store_in_influxdb = True
- sensors_config_yml = jeelinklog_sensors.yml
- influx_config_yml = jeelinklog_influxdb.yml
- log_path = /home/pi/logs/jeelinklog
- logfile_new_sensors = jeelink_new_sensors.log
- [jeelink]
- serialport = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL01MYTF-if00-port0
- baudrate = 57600
- initTimeout = 2
- # JeeLink Init Command
- # <n>a set to 0 if the blue LED bothers
- # <n>f initial frequency in kHz (5 kHz steps, 860480 ... 879515) (for RFM #1)
- # <n>F initial frequency in kHz (5 kHz steps, 860480 ... 879515) (for RFM #2)
- # <n>h altituide above sea level
- # <n>m bits 1: 17.241 kbps, 2 : 9.579 kbps, 4 : 8.842 kbps (for RFM #1)
- # <n>M bits 1: 17.241 kbps, 2 : 9.579 kbps, 4 : 8.842 kbps (for RFM #2)
- # <n>r use one of the possible data rates (for RFM #1)
- # <n>R use one of the possible data rates (for RFM #2)
- # <n>t 0=no toggle, else interval in seconds (for RFM #1)
- # <n>T 0=no toggle, else interval in seconds (for RFM #2)
- # v show version
- # <n>y if 1 all received packets will be retransmitted (Relay mode)
- # init cmd for TX29 AND TX35 sensors (17.241 and 9.579 kbps, toggle every 30s)
- initCmd = 30t 3m v
- # init cmd for TX29 sensors only (17.241 kbps, no toggle)
- #initCmd = 0t 1m v
- [mqtt]
- enable = True
- server = 127.0.0.1
- port = 1883
- user =
- password =
- # topic prefix
- topic_prefix = LaCrosse
- topic_prefix_outside_temphum = wetter/atemphum
- # additional single topics for outside temp/hum
- topic_outside_temp = wetter/atemp
- topic_outside_hum = wetter/ahum
- topic_outside_dew = wetter/dewpoint
- topic_outside_abshum = wetter/abshum
- # topic for notifications (low battery, new sensor found...)
- subtopic_notify = NOTIFY
- publish_unknown_sensors = False
- publish_unknown_new_sensors = True
- [sensors]
- # average sensor values - average over that many received readings
- average_value_steps = 5
- max_off_value = 2.0
- ignore_off_value_timeout = 60
- # interval in s to report data via MQTT
- publish_interval = 60
- # interval in s to store data in InfluxDB
- store_interval = 300
- publish_interval_outside = 120
- store_interval_outside = 300
- data_maxage = 600
- outside_sensors_use_median = True
- # otherwise average is used
- calculate_dewpoint = True
- calculate_absolute_humidity = True
- write_dewpoint_to_influxdb = True
- write_abshum_to_influxdb = True
- # for calculated (averaged from multiple sensors)
- influxdb_instance_combined_outside_sensors = wetter
- influxdb_sensorname_combined_outside_sensors = Outside
|
